Exact drop frame and pulldown.
Something not adding up, or a frame rate you need that is not there? Email me and I will reply. Most questions are answered below first.
At 29.97 drop frame that label does not exist. The rule drops the first two
frame numbers at the start of every minute except the tenth ones, so the minute
begins at ;02. The app offers you the nearest label that is real
rather than quietly changing your number, which is what most calculators do.
At 29.97 non drop, one hour of timecode lasts an hour and about 3.6 seconds of real time. That is the whole reason drop frame exists. The readout shows the timecode, the frame count and the true elapsed time together so you can see the difference instead of guessing at it.
Because there are two. You can hold the running time, which changes the frame count, or hold the frame count, which changes the running time. Over an hour they differ by three minutes. The app works out both and lets you pick, rather than choosing one and not telling you.
Both answers are in use. Settings, then Duration counting, switches between counting the gap and counting both ends. Set it to match your editing system.
Check the duration counting setting first, as above. On a mixed rate timeline the app sums every clip as an exact ratio and rounds once at the end, so it can differ by a frame from a system that rounds each clip as it goes. The app's answer is the one that does not drift.
Which of the A, B, C and D positions a frame lands on when 23.976 material is laid onto 29.97. Converted material is numbered 30 non drop, not drop frame.
They are on the device, not in an account, so they do not move between phones and they are not in a backup you can browse. Deleting the app removes them.
Open the unlock screen and tap Restore purchase, or find the same button in Settings. It is a one time purchase tied to your Apple Account, so it comes back on any device signed in to the same account.
Settings, then Language. English and Greek are there now. It changes the app only and leaves the rest of your phone alone.
Every frame rate and counting rule in the app cites a clause of Recommendation ITU-R BT.1366-3, the published definition of the SMPTE time address formats. The arithmetic uses exact whole frames and exact ratios, so 29.97 is held as 30000 over 1001 and never as a decimal. Every label in a 24 hour day, at every supported rate, is checked against an independent implementation before each release. The same summary is in the app under Settings, How the maths is verified.
The app collects nothing and sends nothing anywhere. The full policy is on the privacy page.